Smart mounting with the right bracket.

Mounting brackets for SCHOCK® telescopic slides—precisely fastened, permanently stable

Our mounting brackets are the ideal solution for simple, secure, and precise mounting of telescopic slides in a wide range of applications. Whether in furniture construction, mechanical engineering, or industrial systems, these perfectly fitting brackets make installation quick, clean, and reliable.

Made from high-quality galvanized steel strip (ZM100, Zinc+), they provide maximum stability while taking up minimal space. Their well-designed geometry allows both side and bottom mounting, depending on the installation space requirements.

Whether combined with full-extension slides, soft-close self-closing, or push-to-open functions, our mounting brackets guarantee a secure hold, perfect alignment, and a long-lasting connection—without compromise.

Enclosure mounting bracket 35

For telescopic slide series

• Partial extension 016
• Over-extension 044

Bracket for mounting telescopic slides in a standard electronics rack/enclosure (IT cabinet, rack).

You need 2 brackets per telescopic slide.

Mounting hardware per bracket to be provided by the customer:

• 2 x countersunk screw M4 x 10 mm (DIN 7991)
• 2 x hex nut M4 (DIN 934)
• 2 x washer (DIN 125)

Enclosure mounting bracket 57

For telescopic slide series

• Partial extension 039

Bracket for mounting telescopic slides in a standard electronics rack/enclosure (IT cabinet, rack).

You need 2 brackets per telescopic slide.

Mounting hardware per bracket to be provided by the customer:

• 2 x countersunk screw M5 x 10 mm (DIN 7991)
• 2 x hex nut M5 (DIN 934)
• 2 x washer (DIN 125)

Universal bracket 32

For telescopic slide series

• Partial extension 010
• Over-extension 036 soft-close self-closing
• Over-extension 037
• Over-extension 038
• Full extension 039 self-closing

For floor or platform mounting. At least 2 brackets per telescopic slide required (depending on rail length).

You need 2 brackets per telescopic slide.

Mounting hardware per bracket to be provided by the customer:

• 2 x countersunk screw M5 x 12 mm (DIN 7991)
• 2 x hex nut M5 (DIN 934)
• 2 x washer (DIN 125)

Clip-on bracket

For telescopic slide series

• Full extension 012
• Full extension 072 without self-closing and push-to-open

You need 1 bracket per telescopic rail.

Mounting hardware per bracket to be provided by the customer:

• 2 x countersunk screw M5 x 12 mm (DIN 7991)
• 2 x hex nut M5 (DIN 934)
• 2 x washer (DIN 125)